ABS Prototype 3D

In terms of material properties, ABS plastic is quite easy to print from the hot point of view. No matter what kind of extruder is used, the material will be smoothly extruded without worrying about clogging or solidification. However, the steps after the squeeze are a little difficult. This...

Product Details

In terms of material properties, ABS plastic is quite easy to print from the hot point of view. No matter what kind of extruder is used, the material will be smoothly extruded without worrying about clogging or solidification. However, the steps after the squeeze are a little difficult. This material has the characteristic of being cold-collapsed and will partially fall off from the heating plate and become vacant, causing problems. In addition, if the height of the printed object is very high, the entire layer may sometimes peel off. Therefore, ABS printing can not be less heating plate. In addition, I also recommend that you use a closed printer, at least not to print in rooms with too low a room temperature, which will cause the material to cool down and cause shrinkage.


ABS prototype 3d can print very fast, but also set the instrument to significantly increase the speed of withdrawal. Since the problems with spinning are rare, it is usually sufficient to pump back a little.


ABS prototype 3d  strength:

As long as the print is made at an appropriate temperature and the layers of material are firmly stuck, the strength of ABS prototype 3d becomes quite high. ABS prototype 3d is soft and will only bend if subjected to pressure and will not break.

abs prototype 3d part.jpg

abs prototype 3d printed.jpg

abs prototype 3d printing.jpg

abs prototype 3d.jpg

Hot Tags: ABS prototype 3D, China, manufacturers, suppliers, company
Related Products

Inquiry