Cnc Machining Metal Flange

- Jan 02, 2019 -

Cnc Machining Metal parts

There are many types of Cnc Machining Metal parts , but most of the processing manufacturers of Cnc Machining Metal parts have the same feeling: Cnc Machining Metal Flange is difficult to process. In fact, the reasons are nothing more than the following:

1: The chemical relationship between the tool and the material to be processed causes work hardening and low thermal conductivity of the material to be processed. Not only is it easy to cause unusual wear, but it also causes chipping and abnormal cracking.

Cnc Machining Metal Flange.jpg

2: Low thermal conductivity causes plastic deformation of the cutting pin and faster tool wear.

3: The built-up edge is easy to cause small pieces of debris to remain on the cutting edge and cause poor processing of the surface.

4: The hardness of the machining causes the tool to wear faster and it is difficult to chip.

The solutions to the above processing problems are as follows:

A: Choosing the right tool: The tool for Cnc Machining Metal parts should have excellent toughness, and the strength of the cutting edge and the bonding force of the coating film should be relatively high.

B: Sharp cutting edge: The chip breaker groove is wider, which reduces the cutting pressure, so that the chip removal can be well controlled.

C: Optimal cutting conditions: Inappropriate machining conditions reduce tool life.

D: Use a tool with high thermal conductivity.

Our company specialized in Cnc Machining Metal parts. lf you need Cnc Machining Metal parts to be made, please contact:

Related News

Related Products

  • Rapid Prototype Abs Part
  • Brass Prototyping Shop
  • Rapid Prototype Acrylic
  • Automotive Taillight Injection Molding
  • Precision Turned Parts
  • Machining Titanium Parts