316 Stainless Steel Flanges

- Dec 28, 2018 -

Self-test process for CNC 316 stainless steel flanges parts processing

Cnc processing is actually index-controlled processing. After the design drawings are written into the program, the computer is connected to the CNC machine tool, and the operation of the CNC machine tool is controlled by programming to complete the processing of the precision workpiece. Cnc processing is mainly suitable for the processing of small batches and various types of workpieces, and the machining accuracy of cnc machining is very high, so it is mostly used for the processing of precision parts. Below we will come to understand the self-test process of the Czech Republic 316 stainless steel flanges 316 stainless steel flanges parts processing.

316 stainless steel flanges.jpg

316 stainless steel flanges


316 stainless steel flanges.jpg

316 stainless steel flanges

1. The CNC CNC lathe processor must clearly understand the contents of the process card before processing, and clearly know the parts, shapes and drawings of the workpiece to be processed and know the processing contents of the next process.

2. Before the workpiece is clamped, it should be measured whether the blank size meets the requirements of the drawings. When the workpiece is clamped, it must be carefully checked whether the placement is consistent with the programming instructions.

3. After the roughing is completed, self-test should be carried out in time to adjust the data with errors in time. The self-test content is mainly the position size of the processed part.

(1) Whether the workpiece is loose;

(2) Whether the workpiece is correctly divided;

(3) Whether the dimensions of the CNC 316 stainless steel flanges parts to the reference edge (reference point) meet the requirements of the drawings;

(4) The positional size of the NC machining parts relative to each other. The roughened shape ruler is measured after the position size has been checked (except for the arc).

4. Finishing after roughing and self-testing. After finishing, the worker should carry out self-test on the shape and size of the processing part: the basic length and width dimensions of the processed part of the vertical surface are measured; the base point size marked on the drawing is measured on the processed part of the inclined surface.

5. The worker completes the self-inspection of the workpiece and confirms that it conforms to the drawings and process requirements before removing the workpiece and sending it to the inspector for special inspection.

QQ图片20181221193537.jpg316 stainless steel flanges


316 stainless steel flanges.jpg

316 stainless steel flanges

Related News

Related Products

  • Aluminum Casting Fittings
  • ABS Prototype Parts
  • Sheet Metal Prototype
  • Aluminum Aerospace Components Prototype
  • Car Air Conditioning Injection Molding
  • Cnc Milled Aluminum Enclosure